Re: WN1723

Message posted by don on July 11, 2018 at 13:41:12 PST:

In my few years of adsb tracking I have seen aircraft that seem to be on the range near the restricted areas. When that happens I always turn up the scanners waiting for a response from Nellis ATC directing them away. As it turns out there are many reasons a plane could be plotted in the wrong position on these adsb tracking programs. One for example is they have a broken transponder or gps on board. So without the validation radio calls from the ATC range control I discount those planes. Hope this info helps?

In Reply to: Re: WN1723 posted by Chris on July 11, 2018 at 13:26:04 PST:


[ Discussion Forum Index ] [ FAQ ]